User profiles for Mohammad R. Rezaei
 | Mohammad reza RezaeiAssistant professor, Damghan university Verified email at du.ac.ir Cited by 503 |
Effects of ARB and ageing processes on mechanical properties and microstructure of 6061 aluminum alloy
MR Rezaei, MR Toroghinejad… - Journal of Materials …, 2011 - Elsevier
Accumulative roll bonding (ARB) has been used as a severe plastic deformation process for
the production of high-strength materials. Ageing treatment has been found to enhance the …
the production of high-strength materials. Ageing treatment has been found to enhance the …
3D network structure graphene hydrogel-Fe3O4@ SnO2/Ag via an adsorption/photocatalysis synergy for removal of 2, 4 dichlorophenol
In this study, a core-shell design of Fe 3 O 4 @SnO 2 was prepared, doped with silver
nanoparticles (Fe 3 O 4 @SnO 2 /Ag) and later laden into three-dimensional graphene oxide …
nanoparticles (Fe 3 O 4 @SnO 2 /Ag) and later laden into three-dimensional graphene oxide …
[HTML][HTML] Single and combined effects of CuSO4 and polyethylene microplastics on biochemical endpoints and physiological impacts on the narrow-clawed crayfish …
A Zeidi, MH Sayadi, MR Rezaei, M Banaee… - Chemosphere, 2023 - Elsevier
This study investigated the toxicity of polyethylene microplastics (MPs; <0.02 mm) and CuSO4,
alone and in combination, on the freshwater crayfish Pontastacus leptodactylus. In this …
alone and in combination, on the freshwater crayfish Pontastacus leptodactylus. In this …
Bio-synthesis of palladium nanoparticle using Spirulina platensis alga extract and its application as adsorbent
In this study, the potential of Spirulina platensis alga for the production of palladium
nanoparticles and their application for lead removal from aqueous solution was studied. The …
nanoparticles and their application for lead removal from aqueous solution was studied. The …
High-strength and highly-uniform composites produced by compocasting and cold rolling processes
Silicon carbide reinforced aluminum alloy composite materials produced by casting methods
are increasingly used in many engineering fields. However, these materials suffer from …
are increasingly used in many engineering fields. However, these materials suffer from …
Synthesis of CuO/Bi2O3 nanocomposite for efficient and recycling photodegradation of methylene blue dye
Dyes are considered as the most important pollutants in water because of their applications
and potential risks for living organisms. Therefore, in this study, the efficiency of CuO/Bi 2 O 3 …
and potential risks for living organisms. Therefore, in this study, the efficiency of CuO/Bi 2 O 3 …
Nickel ferrite nanoparticles catalyzed dark fermentation of dairy wastewater for biohydrogen production
N Fahoul, MH Sayadi, MR Rezaei… - Bioresource Technology …, 2022 - Elsevier
Biohydrogen production from wastewater is a new, low cost, sustainable energy development.
In this study, dark fermentation, as a type of biological production of biohydrogen, was …
In this study, dark fermentation, as a type of biological production of biohydrogen, was …
An efficient removal of lead from aqueous solutions using FeNi3@ SiO2 magnetic nanocomposite
The aim of the present study was the synthesis of nickel ferrite magnetic nanoparticles
functionalized with SiO 2 using Stöber method for its application to remove lead from the water. To …
functionalized with SiO 2 using Stöber method for its application to remove lead from the water. To …
Refinement of microstructure and improvement of mechanical properties of Al/Al2O3 cast composite by accumulative roll bonding process
Some important problems associated with cast metal matrix composites (MMCs) include non-uniformity
of the reinforcement particles, high porosity content, and weak bonding between …
of the reinforcement particles, high porosity content, and weak bonding between …
Production of nano-grained structure in 6061 aluminum alloy strip by accumulative roll bonding
MR Rezaei, MR Toroghinejad… - Materials Science and …, 2011 - Elsevier
Accumulative roll-bonding (ARB) process is a severe plastic deformation (SPD) process
capable of developing grains below 1μm in diameter. In this study, the ARB process was …
capable of developing grains below 1μm in diameter. In this study, the ARB process was …