User profiles for Michael S. Titus
Michael S TitusAssociate Professor at Purdue University Verified email at purdue.edu Cited by 1538 |
Creep and directional coarsening in single crystals of new γ–γ′ cobalt-base alloys
Single crystal tensile creep tests have been performed on L1 2 -containing cobalt-based
alloys loaded along the [001] orientation. Co–Al–W alloys with additions of Ni, Ta, Cr and Mo …
alloys loaded along the [001] orientation. Co–Al–W alloys with additions of Ni, Ta, Cr and Mo …
Creep-induced planar defects in L12-containing Co-and CoNi-base single-crystal superalloys
Precipitate shearing mechanisms during single-crystal tensile creep of L1 2 -containing Co-
and CoNi-base alloys have been investigated. Interrupted creep tests were conducted at …
and CoNi-base alloys have been investigated. Interrupted creep tests were conducted at …
Prevalence of SARS-CoV-2 in human post-mortem ocular tissues
…, S Singh, RE Wright III, KM Jones, MS Titus… - The Ocular Surface, 2021 - Elsevier
Background SARS-CoV-2 is found in conjunctival swabs and tears of COVID-19 patients.
However, the presence of SARS-CoV-2 has not been detected in the human eye to date. We …
However, the presence of SARS-CoV-2 has not been detected in the human eye to date. We …
High resolution energy dispersive spectroscopy mapping of planar defects in L12-containing Co-base superalloys
Local chemical fluctuations in the vicinity of superlattice intrinsic stacking faults (SISFs) have
been observed via high resolution energy dispersive X-ray spectroscopy (EDS) mapping in …
been observed via high resolution energy dispersive X-ray spectroscopy (EDS) mapping in …
Planar defect formation in the γ′ phase during high temperature creep in single crystal CoNi-base superalloys
… experiments and the composition of the CoNi superalloy “CoNi-A” (Co 45.9 at%, Ni 29.2
at%, Al 9.8 at%, W 6.3 at%, Ta 2.4 at%, Cr 6.4 at%) studied in this work was reported by Titus et …
at%, Al 9.8 at%, W 6.3 at%, Ta 2.4 at%, Cr 6.4 at%) studied in this work was reported by Titus et …
Oxidation behavior between 700 and 1300° C of refractory TiZrNbHfTa high‐entropy alloys containing aluminum
Refractory alloys without Cr, Al, and Si additions exhibit very poor high temperature oxidation
resistance and thus significantly limit their applications. With an aim to improve the poor …
resistance and thus significantly limit their applications. With an aim to improve the poor …
Oxide rupture-induced conductivity in liquid metal nanoparticles by laser and thermal sintering
Metallic inks with superior conductivity and printability are necessary for high-throughput
manufacturing of printed electronics. In particular, gallium-based liquid metal inks have shown …
manufacturing of printed electronics. In particular, gallium-based liquid metal inks have shown …
Creep deformation-induced antiphase boundaries in L12-containing single-crystal cobalt-base superalloys
Creep-induced antiphase boundaries (APBs) in new Co-base single-crystal superalloys with
coherent embedded L1 2 -γ′ precipitates have been observed. APBs formed during single…
coherent embedded L1 2 -γ′ precipitates have been observed. APBs formed during single…
[HTML][HTML] A high-throughput imaging and nuclear segmentation analysis protocol for cleared 3D culture models
Imaging and subsequent segmentation analysis in three-dimensional (3D) culture models
are complicated by the light scattering that occurs when collecting fluorescent signal through …
are complicated by the light scattering that occurs when collecting fluorescent signal through …
Solute segregation and deviation from bulk thermodynamics at nanoscale crystalline defects
MS Titus, RK Rhein, PB Wells, PC Dodge… - Science …, 2016 - science.org
It has long been known that solute segregation at crystalline defects can have profound
effects on material properties. Nevertheless, quantifying the extent of solute segregation at …
effects on material properties. Nevertheless, quantifying the extent of solute segregation at …