The insertion of implants and medical devices has emerged as a common and often life-saving
procedure. A current estimate of the rate of total hip replacement in the world is …

This overview highlights some of the key aspects regarding materials qualification needs
across the additive manufacturing (AM) spectrum. AM technology has experienced …

… , (J, which from a fracture mechanics standpoint is equivalent to a traction-free crack in a
film supporting a uniform tensile stress (J prior to introduction of the crack. The tensile stress (J …

A geometry-based simulation is used to predict porosity caused by insufficient overlap of melt
pools (lack of fusion) in powder bed fusion. The inputs into the simulation are hatch spacing…

… 4j). The inclusion of the heuristics layer allows information about the location of the anomaly
detections with respect to the build plate, the parts, and the surrounding anomaly detections …

The ability to deposit a consistent and predictable solidification microstructure can greatly
accelerate additive manufacturing (AM) process qualification. Process mapping is an …

Accurate detection, characterization, and prediction of defects has great potential for immediate
impact in the production of fully-dense and defect free metal additive manufacturing (AM) …

… process, step (g) shows a representation of the fingerprints used to describe the melt pool
morphologies, steps (h) and (i) depict the linkage of in-situ and ex-situ results, and steps (j) …

… 6j) [48] is used to convert the responses (of arbitrary magnitude) stored in the final FC layer
into a pseudo-probability for each classification category. In the implementation used in this …

The porosity observed in additively manufactured (AM) parts is a potential concern for
components intended to undergo high-cycle fatigue without post-processing to remove such …