Characterization of Artificial Stone Produced with Blast Furnace Dust Waste Incorporated into a Mixture of Epoxy Resin and Cashew Nut Shell Oil

Polymers (Basel). 2023 Oct 21;15(20):4181. doi: 10.3390/polym15204181.

Abstract

The demand for materials with improved properties and less negative impact on the environment is growing. Artificial stones are examples of these materials produced with up to 90% of particulate material joined by a binder. This article evaluates the physical and mechanical properties of two artificial stones produced with processing steel residue (blast furnace dust waste) and quartz powder. Two binders were used: pure epoxy resin, denoted as ASPB100, or a mixture of 70 wt% epoxy resin with 30 wt% cashew nut shell oil, denoted as ASPB7030. The process took place under vibration, compression (3 MPa/20 min and 90 °C) and vacuum (80 Pa). ASPB100 showed water absorption of 0.07%, while for ASPB7030, it was 0.54%. They were classified as having high mechanical strength associated with bending stress values equal to 32 and 25 MPa, respectively. Stain resistance indicated that both artificial stones had their stains removed with the tested cleaning agents. In this way, the novel artificial stones produced are sustainable alternatives for the application of blast furnace waste and cashew nut shell oil, reducing their negative impacts on the environment.

Keywords: artificial stone; blast furnace dust waste; epoxy resin.

Grants and funding

This research was funded by FAPERJ grant number E-26/200.847/2021, E-26/210.028/2023 and CNPQ grant number 301634/2018-1. The participation of A.R.G.A. was sponsored by FAPERJ through the research fellowships proc. nos.: E-26/210.150/2019, E-26/211.194/2021, E-26/211.293/2021 and E-26/201.310/2021 and by CNPq through the research fellowship PQ2 307592/2021-9.