Influence of fly ash on thermo-mechanical and mechanical behavior of injection molded polypropylene matrix composites

Rajhans Meena; Abdul Wahab Hashmi; Shadab Ahmad; Faiz Iqbal; Hargovind Soni; Anoj Meena; Abdullah A Al-Kahtani; Bidhan Pandit; Hesam Kamyab; Himanshu Payal; Mohammad Yusuf

doi:10.1016/j.chemosphere.2023.140225

Influence of fly ash on thermo-mechanical and mechanical behavior of injection molded polypropylene matrix composites

Chemosphere. 2023 Dec:343:140225. doi: 10.1016/j.chemosphere.2023.140225. Epub 2023 Sep 22.

Authors

Affiliations

¹ Advanced Manufacturing and Mechatronics Lab, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, 302017, India.
² Advanced Manufacturing and Mechatronics Lab, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, 302017, India. Electronic address: 2018rme9108@mnit.ac.in.
³ School of Mechanical Engineering, Shandong University of Technology, Zibo 255049, PR China.
⁴ Mechanical Engineering Department, School of Engineering, University of Lincoln, England, UK.
⁵ Department of Mechanical Engineering, National Institute of Technology Delhi 110036, India.
⁶ Department of Chemistry, College of Science, King Saud University, Riyadh 11451, Saudi Arabia.
⁷ Department of Materials Science and Engineering and Chemical Engineering, Universidad Carlos III de Madrid, Avenida de la Universidad 30, Leganés, 28911 Madrid, Spain.
⁸ Faculty of Architecture and Urbanism, UTE University, Calle Rumipamba S/N and Bourgeois, Quito, Ecuador; Department of Biomaterials, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences, Chennai, 600 077, India; Process Systems Engineering Centre (PROSPECT), Faculty of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia.
⁹ Department of Mechanical Engineering, Sharda School of Engineering and Technology, Sharda University, India. Electronic address: himanshu.payal@sharda.ac.in.
¹⁰ Clean Energy Technologies Research Institute (CETRI), Process Systems Engineering, Faculty of Engineering and Applied Science, University of Regina, 3737 Wascana Parkway, Regina, SK S4S 0A2, Canada. Electronic address: yusufshaikh.amu@gmail.com.

PMID: 37742771
DOI: 10.1016/j.chemosphere.2023.140225

Abstract

Polypropylene composites find widespread application in industries, including packaging, plastic parts, automotive, textiles, and specialized devices like living hinges known for their remarkable flexibility. This study focuses on the manufacturing of polypropylene composite specimens by incorporating varying weight percentages of fly ash particles with polypropylene using a twin-screw extruder and injection molding machine. The composites were comprehensively tested, evaluating tensile, compressive, and flexural strength, solid-state and polymer melt properties, modulus, damping, and thermal response. The findings reveal that the compressive strength of polypropylene increases up to 2 wt% of added fly ash particles and subsequently exhibits a slight decline. Tensile strength demonstrates an increase up to 1 wt% of fly ash, followed by a decrease with a 2 wt% addition, and then a subsequent increase. Flexural strength shows improvement up to 3 wt% fly ash addition before declining. The storage modulus curve is categorized into three regions: the glassy region (up to 0 °C), the glass transition region (0-50 °C), and the glass transition region of polypropylene (>50 °C), each corresponding to different molecular motions. Weight loss curves exhibit similar trends, indicating uniform pyrolysis behavior attributed to consistent chemical bonds. Plastic degradation commences around 440 °C and concludes near 550 °C. Additionally, elemental mapping of fly ash composition identified various elements such as O, Si, K, Mg, Ca, Cl, Na, P, Al, Fe, S, Cu, Ti, and Ni. These findings offer valuable insights into the mechanical and thermal properties of polypropylene composites reinforced with fly ash, rendering them suitable for a wide range of industrial applications necessitating strength and durability across temperature variations.

Keywords: Dynamic mechanical analysis; Flexural testing; Fly ash; Polypropylene composites; Thermo-gravimetric analysis.