Urban flood numerical modeling and hydraulic performance of a drainage network: A case study in Algiers, Algeria

Water Sci Technol. 2023 Oct;88(7):1635-1656. doi: 10.2166/wst.2023.277.

Abstract

Urban sewer system management is challenging due to its higher vulnerability to flooding caused by rapid urbanization and climate change. For local decision-makers, storm water management is essential for urban planning and development. Therefore, the main objective of this study is to develop a numerical model for the sewerage network of the central catchment area of Algiers since it has experienced frequent overflows during the winter season. For this purpose, to model the sewerage networks, the model was built by coupling ArcGIS with MIKE URBAN. Its calibration and validation were performed using real-time measurements with a time step of 15 min. The model was evaluated by several statistical indicators, such as the coefficient of determination (R2), Nash-Sutcliffe efficiency (NSE), root mean square error (RMSE), and percent bias (PBIAS). The model results showed acceptable model performance, with an NSE superior to 0.50, R2 of approximately 0.63, RMSE of 7%, and PBIAS of 10% during the validation of the model. The performance parameters prove the reliability of the developed model. The employed model can be applied in other regions and could be helpful for policymakers and managers to improve flood mitigation measures based on the model prediction of the sewerage network.

MeSH terms

  • Algeria
  • Climate Change
  • Floods*
  • Reproducibility of Results
  • Urbanization*