%0 Journal Article %A Andrew J. Robinson %A William London %A Laszlo Kotan %A Warwick Downing %T A modification to the Maquet Flow-i anaesthesia machine for ICU ventilation %D 2020 %R 10.1101/2020.04.06.20054882 %J medRxiv %P 2020.04.06.20054882 %X The authors present an easily manufactured modification of Getinge Group’s Maquet Flow-i anaesthesia machine that gives it potential to be used long-term as an Intensive Care ventilator for emergency circumstances. There are some 7000 such machines in use worldwide, which could assist in increasing ICU ventilated bed capacity in a number of nations. The authors believe this modification has potential as a solution to increasing ventilator numbers for the COVID-19 pandemic, in hospitals where the Flow-i is underutilised for its designed purpose during this emergency. The technical drawing files are downloadable on the GrabCAD website and are Creative Commons (CC-BY 4.0) licensed to allow local manufacture of the modification. We welcome other Flow-i users and engineers to join us in troubleshooting this project on the associated GrabCAD discussion group during this ‘pre-print’ phase of research.Competing Interest StatementWarwick Downing is the owner of RAM3D and may profit from scale manufacture of the described modification. However, CAD files allowing others to compete are freely provided.Funding StatementThe authors received no payment from any source for this work.Author DeclarationsAll relevant ethical guidelines have been followed; any necessary IRB and/or ethics committee approvals have been obtained and details of the IRB/oversight body are included in the manuscript.YesAll necessary patient/participant consent has been obtained and the appropriate institutional forms have been archived.YesI understand that all clinical trials and any other prospective interventional studies must be registered with an ICMJE-approved registry, such as ClinicalTrials.gov. I confirm that any such study reported in the manuscript has been registered and the trial registration ID is provided (note: if posting a prospective study registered retrospectively, please provide a statement in the trial ID field explaining why the study was not registered in advance).YesI have followed all appropriate research reporting guidelines and uploaded the relevant EQUATOR Network research reporting checklist(s) and other pertinent material as supplementary files, if applicable.YesTest information is all in the paper. CAD file is available on GrabCAD. https://grabcad.com/library/flow-i-bridge-1 %U https://www.medrxiv.org/content/medrxiv/early/2020/04/11/2020.04.06.20054882.full.pdf