SARS-CoV-2 in human sewage in Santa Catalina, Brazil, November 2019

Sampling urban sewage in Florianopolis, Santa Catalina, Brazil

We collected urban sewage samples in Florianopolis, Santa Catalina, Brazil (Figure 1) in 6 independent sampling events since 30^th October, 2019 until 4^th March, 2020. Raw sewage samples were collected from a separate collection sewage system in central Florianopolis, serving a population of approximately 5,000 inhabitants. The sampling was conducted using a submersible pump inside a well, used for inspection and cleaning of the network. The collection system receives wastewater exclusively, with a linear infiltration rate varying from 0.05 – 1 L / s Km, according to the Brazilian regulation for sanitation projects (ABNT – Associação Brasileira de Normas Técnicas n.9646/1986). In all the sampling events, 200 ml of urban sewage was collected and immediately transferred to the Applied Virology and Environmental Engineering Laboratory of the Federal University of Santa Catarina (Brazil), and stored at -80°C until its use. The concentration of the viral particles was performed using 25 mL of each sample as previously described [16]. Murine Norovirus (MNV-1) was artificially inoculated as sample process control virus to estimate the efficiency of extraction and the final viral load [17]. Viral RNA was extracted from concentrates using the QIAamp® Viral RNA Mini kit (QIAGEN, CA, USA) according to the manufacturer’s instructions, and eluted in 200 µL of RNAse free water. Viral RNA was detected by real-time RT-PCR (RT-qPCR) on a 7500 Real-Time PCR instrument (Applied Biosystems, USA). Sample process control virus, MNV-1, was detected as previously published [18]. SARS-CoV-2 was detected by OneStep qPCR Quantinova kit (QIAGEN, Germany) using oligonucleotides and probe previously published targeting the N1 [19], S and RdRp [20] regions of the SARS-CoV-2 genome. Oligonucleotides and a commercial SARS-CoV-2 RNA (2019-nCoV_N_Positive Control, 2 × 10⁵ genome copies/µL) as positive quantitative control were purchased from IDT (Integrated DNA Technologies, Belgium). Samples were considered as positive when the Cq values were ≤ 38.00. All RT-qPCRs were performed in duplicate in two independent experiments. All the positive samples were confirmed using the Seegene Allplex(tm) 2019-nCoV commercial kit in an independent laboratory (Laboratório de Biologia Molecular, Microbiologia e Sorologia, UFSC University Hospital, Florianopolis, Brazil).

• Download figure
• Open in new tab

Figure 1:

Maps of the sampling location in Florianópolis city, Santa Catarina State, Brazil.

The main physical-chemical features of urban sewages sampled are shown in Table 1. Viral RNA extraction from the sewage samples worked adequately considering the nature of the matrix, showing process efficiency values ranging from 1.6 % to 2.6 %, with an overall value of 2.1% ± 0.2% (M ± ES). Notably, while samples were negative in the first two sampling events (30^th October and 6^th November, 2019), all samples in subsequent events were positive (since 27^th November, 2019 until 4^th March, 2020) (Figure 2). The overall load was 5.83 ± 0.12 log SARS-CoV-2 genome copies L^-1, ranging from 5.49 ± 0.02 (27^th November, 2019) to 6.68 ± 0.02 (4^th March, 2020) (Figure 2). Those SARS-CoV-2 RNA loads are similar to those found in studies performed in France [15], Spain [12], and USA [11,14]. Remarkably, SARS-CoV-2 RNA was detected as early as 27^th November, 2019, 66 days in advance of the first COVID-19 confirmed case in the Americas (in the USA), 91 days in advance of the first case in Brazil, and 97 days in advance of the first confirmed case in Santa Catalina Region. This demonstrates that SARS-CoV-2 was being shed within the community for several months prior to the first cases being reported by regional, national or Pan-American authorities. Few data are available on retrospective studies of SARS-CoV-2 RNA detection in sewage prior to onset of COVID-19 clinical cases in the region of the study. Randazzo et al. [12] conducted a retrospective study of wastewater process plants in the Murcia Region, Spain, and compared the observed data to declared COVID-19 cases at municipality level: the presence of SARS-CoV-2 RNA in sewage was also earlier than the first reported cases.

• Download figure
• Open in new tab

Figure 2:

Evolution of the presence of SARS-COV-2 RNA in urban sewage, Florianopolis, Brazil. Red dots represent negative results. Black dots represent log₁₀ SARS-CoV-2 genome copy per litre of urban sewage (M ± ES)

Interestingly, while the SARS-CoV-2 RNA loads were stable until late February (5.49 ± 0.02, 5.82 ± 0.01 and 5.65 ± 0.10 log SARS-CoV-2 genome copies L^-1 in 30^th November, 2019, 11^th December, 2019 and 20^th February, 2020, respectively), an increase of approximately 1 log was observed on 4^th March 2020 (6.68 ± 0.03 log SARS-CoV-2 genome copies L^-1), coinciding with the first COVID-19 case diagnosed in the region. Unfortunately, 10 days after the last sampling, the Federal Brazilian government ordered a national lockdown which impaired the continuation of the sampling and therefore the confirmation of that increasing tendency.

In conclusion, we have confirmed the presence of SARS-CoV-2 in the Americas as early as 27^th November, 60 days ahead of the reports of COVID-19 cases in the continent and more than 90 days in the case of Brazil. Therefore, our findings demonstrate that SARS-CoV-2 was circulating unnoticed in the community for some months before pandemic status was declared. Our results also show that the SARS-CoV-2 load remained constant until early March, then rose coinciding with the onset of COVID-19 cases in Santa Catalina region. Consequently, this study demonstrates that monitoring of SARS-CoV-2 in wastewater or urban sewage is an excellent tool for anticipating potential epidemiological outbreaks, and would be highly valuable in helping Public Health authorities to define protection measures.